Percentage & Grades for AS/A Level

A Level results are shown by one of the grades A*, A, B, C, D or E indicating the standard achieved,
Grade A* being the highest and Grade E the lowest. ‘Ungraded’ indicates that the candidate has failed to
reach the standard required for a pass at either A Level or AS Level. ‘Ungraded’ will be reported on the
statement of results but not on the certificate.
If a candidate takes an A Level and fails to achieve grade E or higher, an AS Level grade will be awarded if
both of the following apply:
• the components taken for the A Level by the candidate in that session included all the components
making up an AS Level
• the candidate’s performance on these components was sufficient to merit the award of an AS Level
grade.
Percentage uniform marks are also provided on each candidate’s statement of results to supplement their
grade for a syllabus. They are determined in this way:
• A candidate who obtains…
… the minimum mark necessary for a Grade A* obtains a percentage uniform mark of 90%.
… the minimum mark necessary for a Grade A obtains a percentage uniform mark of 80%.
… the minimum mark necessary for a Grade B obtains a percentage uniform mark of 70%.
… the minimum mark necessary for a Grade C obtains a percentage uniform mark of 60%.
… the minimum mark necessary for a Grade D obtains a percentage uniform mark of 50%.
… the minimum mark necessary for a Grade E obtains a percentage uniform mark of 40%.
… no marks receives a percentage uniform mark of 0%.
Candidates whose mark is none of the above receive a percentage mark in between those stated according
to the position of their mark in relation to the grade ‘thresholds’ (i.e. the minimum mark for obtaining a
grade). For example, a candidate whose mark is halfway between the minimum for a Grade C and the
minimum for a Grade D (and whose grade is therefore D) receives a percentage uniform mark of 55%.
The uniform percentage mark is stated at syllabus level only. It is not the same as the ‘raw’ mark obtained
by the candidate, since it depends on the position of the grade thresholds (which may vary from one session
to another and from one subject to another) and it has been turned into a percentage.

Comments

  1. Imran Mirza21 September 2011 at 15:23

    my dear teachers and students leave comments as well
    Love

    ReplyDelete

Post a Comment

Popular posts from this blog

Grade thresholds

PHYSICS GCE Advanced Level and GCE Advanced Subsidiary Level Grade thresholds taken for Syllabus 9702 (Physics) in the May/June 2011 examination. The thresholds (minimum marks) for Grades C and D are normally set by dividing the mark range between the B and the E thresholds into three. For example, if the difference between the B and the E threshold is 24 marks, the C threshold is set 8 marks below the B threshold and the D threshold is set another 8 marks down. If dividing the interval by three results in a fraction of a mark, then the threshold is normally rounded down. Grade A* does not exist at the level of an individual component. The thresholds for the syllabus are determined first by adding together the thresholds for the components taken by the candidate. A reduction may be made at the higher grades depending on the correlation of the papers. If the maximum raw marks for the components are not in the weighting/relationship specified in the syllabus, a weighting is applied...
Read more

All Definitions Needed For A Level (Part 1)

Measurement: Random errors are errors of measurements in which the measured quantities differ from the mean value with different magnitudes and directions. Systematic errors are errors of measurements in which the measured quantities are displaced from the true value by fixed magnitude and in the same direction. Accuracy is a measure of how close the results of an experiment agree with the true value. Precision is a measure of how close the results of an experiment agree with each other. Thermal Physics: The internal energy is a function of state and the total microscopic kinetic and potential energies of the particles  composing the system. The specific latent heat of fusion, L f , is defined as the amount of heat required per unit mass to change a substance from the solid phase to the liquid phase without any change in temperature The specific latent heat of vaporization, L v , is defined as the amount of heat required per unit mass to change a subs...
Read more